MEDICAL MULTIFUNCTIONAL DRILL SAW SYSTEM

Ruijin medical is a specialized enterprise that integrates R & D, design, manufacture, and sales of department of orthopedics surgical instruments, and it has many national patents. Today, I bring you a detailed introduction of NM—100 MEDICAL MULTIFUNCTIONAL DRILL SAW SYSTEM which is widely applied in joint surgery, trauma surgery, neurosurgery and thoracic surgery.

The product consists of a host, a drill jig, a pendulum saw jig, a reciprocating saw jig, a battery, and a charger. The rated torque of the drill jig shall be ≥ 3Nm; the maximum idle output speed of the drill jig shall be from 0 to 18000 rpm for surgery; the drill jig shall be capable of holding an object with a diameter of not less than 3mm; the swing amplitude of the jigsaw jig shall be ≥ 4° Reciprocating saw fixture idle return stroke should be ≥ 3mm; battery voltage is 95% of the rated voltage, the host motor should still maintain the rated torque; measured from the product center 1000mm spherical no-load noise sound pressure level  weighted The average should not be greater than 75dB ; the maximum radial offset of drill fixtures, pendulum saw fixtures, and reciprocating fixtures should meet the requirements of registered product standards; the product’s electrical safety performance should meet the requirements of Appendix A of the registered product standard.

Indications The products are auxiliary instruments used in orthopedic surgery in hospitals and must be used in conjunction with drills, grinding heads, and saw blades for registration of medical device products.